Front Outer Belt End Fitting

Front Outer Belt End Fitting

Removing

- Slide front seat forward as far as stop.

- Pull the cover - 2 - in direction of - arrow - and open it.






- Remove cover - 2 - upward out of floor covering.

- Remove bolt - 1 -.

Installation

- Install bolt - 1 -.

- When installing, slide tab - 4 - under floor covering.

- Press tabs - 3 - under floor covering by closing cover - 2 -.

For the correct tightening specifications; refer to => [ Front Three-Point Seat Belt Assembly Overview ] Front Three-Point Seat Belt Assembly Overview.