Connecting the Vehicle Diagnostic Tester

Connecting the Vehicle Diagnostic Tester

Special tools, testers and auxiliary items required

• Vehicle Diagnostic Tester and diagnostic cable

• Follow the current instructions on the Vehicle Diagnostic Tester. Use the Administration and User Documentation buttons.

Procedure

- Engage the parking brake or operate the electromechanical parking brake.

- Shift the shifter lever into neutral or place the selector lever in the "P" or "N" position.

- Turn off the ignition and connect the Vehicle Diagnostic Tester to the diagnostic connection with the diagnostic cable - arrow -.






- When using the Remote diagnosis head (VAS 5054 A) or the Diagnosis interface (VAS 5055) refer to the Operating Instructions.

- Switch on ignition.

- Turn off all electrical consumers.

• If a error message appears on the screen of the Vehicle Diagnostic Tester, refer to the Operating Instructions.