Horns (H2)/(H7)

Horns (H2)/(H7)

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing

- Switch off ignition and remove ignition key.

- Remove front bumper cover. Refer to Removal and Installation.

- Disconnect electrical connectors - 1 and 4 -.






- Remove nuts - arrows -.

- Remove signal horn - 2 or 3 - from bracket.

Installing

• Tightening specification. Refer to => [ Signal Horns Overview ] Signal Horns Overview.

Install in reverse order of removal. Note the following:

- Install front bumper cover. Refer to Removal and Installation.