Front Turn Signal Lamp Bulbs (M5)/(M7)

Front Turn Signal Lamp Bulbs (M5)/(M7)

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

• Headlamps must be adjusted after performing measures that could influence headlamp adjustment. Refer to => [ Headlamps Checking and Adjusting Conditions ] Headlamps Checking and Adjusting Conditions.

Removing






- Remove headlamp. Refer to => [ Headlamps ] Headlamps.

- Remove turn signal housing cover - 1 - from headlamp housing - arrow A -.

- Turn socket - 2 - counterclockwise - arrow B - and remove from housing.

- Remove lamp from socket.

Installing

Install in reverse order of removal. Note the following:

- Insert the new bulb into the housing without touching the bulb with bare hands.

- Close the housing lid.

- Install the headlamp. Refer to => [ Headlamps ] Headlamps.