Lower Rear Lid Trim

Lower Rear Lid Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)






Removing

- Remove the rear shelf.

- Remove bolts - 2 -.






- Unclip lower rear lid trim - 1 - with Trim Removal Wedge (3409).

Installation

Install in reverse order of removal. Note the following:

• If trim clamps remain in body mounting points, remove these and insert them in trim.

• Check clamps for damage or deformation, replace if necessary.

For the correct tightening specifications; refer to => [ Rear Lid Trim Assembly Overview ] Rear Lid Trim Assembly Overview.