Rear Lid End Panel Trim Panel Assembly Overview

Rear Lid End Panel Trim Panel Assembly Overview

• The - arrow - points to the direction of travel.






1 Rear cross panel trim

• Removing and Installing, refer to => [ Rear Cross Panel Trim ] Rear Cross Panel Trim

2 Rear lid seal

3 Pin

• Quantity: 2

• Secured to body

4 Eye

• Quantity: 2

• Secured to body

5 Left luggage compartment side trim panel

• Must be installed before installing the rear lid end panel trim panel

6 Right luggage compartment side trim panel

• Must be installed before installing the rear lid end panel trim panel

7 Clip

• Quantity: 4

• Replace if damaged or deformed

8 Cover

• For the rear lid end panel trim panel

• Removing and Installing, refer to => [ Rear Lid End Panel Trim Panel Cover ]

Rear Lid End Panel Trim Panel Cover





- Remove the cover - 1 - from the retainers - 3 - in the rear lid end panel trim panel - 2 -.

- Make sure the upper point of the - arrows A - spring supports the cover and the bracket - arrow B - on the rear lid end panel trim panel.