Roadster

Foot Rest Cover

Removing

- Remove driver side instrument panel cover. Refer to => [ Driver Side Instrument Panel Cover ] Driver Side Instrument Panel Cover.

- Remove the lower A-pillar trim. Refer to => [ Lower A-Pillar Trim ] Lower A-pillar Trim.

- Remove the bolt - 2 -.






- Push the foot support cover - 1 - far enough upward until the tab - 6 - disengages from the mount - 4 -.

- Remove the foot support cover - 1 -.

Installation

Install in reverse order of removal. Note the following:

- Make sure the tab - 6 - engages securely into the mount.

- Make sure spring nut - 3 - fits correctly on the foot rest mount - 4 -.

For the correct tightening specifications; refer to => [ Footrest Cover and Bracket Assembly Overview ] Footrest Cover and Bracket Assembly Overview.