Plenum Chamber Cover

Plenum Chamber Cover






1 Hood seal

• When installed correctly, seal must lie over plenum chamber cover as shown in the illustration.

2 Plenum chamber cover

• Wiper arms removed.

• For easier removal/installation, spray windshield edge strip with soapy solution.

• Lid seal removed.

• Remove trim panel upward diagonally from edge strip beginning at window edge.

• Vehicles with bolts => [ Plenum Chamber Cover with Screws ]

Risk of window breaking during installation

Do not hit the trim when installing it.

Carefully press in trim sideways, beginning in edge strip.

3 Molding

• For easier removal/installation of plenum chamber cover, spray molding with soapy solution.

• No replacement part

4 Windshield

5 Plenum chamber

6 Bulkhead trim

Plenum Chamber Cover with Screws





- Remove the bolts - 3 - and - 4 -.

- Remove rubber seal - 1 -.

- Pull plenum chamber cover - 2 - vertically up from the window edge starting carefully with the windshield catches - arrows -.