Hood Weatherstrip: Service and Repair

Hood Seal






1 Lock carrier seal

• Slide onto center of lock carrier from behind.

2 Right sealing profile

• Self-adhesive.

• Remove protective paper and press onto fender flange.

3 Plenum chamber seal

• Slide into sealing profile with pre-tension, beginning at sides.

• Press seal onto opposite side in stages.

• Install seal with tension in the curved areas.

Buckling in the rounded areas is not permitted.

• Slide seal into sealing profile on opposite side.

4 Plenum chamber cover

• Must be slid under lip of plenum chamber seal.

5 Left sealing profile

• Self-adhesive.

• Remove protective paper and press onto fender flange.