Hood - TT RS, Left and Right Hood Lock

Left and Right Hood Lock

Removing






- Remove the bolts - arrows -.

- Remove the hood lock - 1 - until the cable is visible,

- Release retaining tab - 1 - - arrow A - and remove control cable bracket from mount - 2 - - arrow B -.






- Remove control cable fitting - 3 - from release lever - 4 - on the lid lock.

- Remove the lid lock.

Installation

• For the correct tightening specifications; refer to => [ Hood Locks Assembly Overview ] Hood Locks Assembly Overview.

Install in reverse order of removal. Note the following:

- Adjust the hood. Refer to => [ Hood, Adjusting ] Hood, Adjusting