Front Bumper - Audi TT RS

Impact Member

Removing






- Remove the impact absorber. Refer to => [ Impact Absorber ] Impact Absorber.

- Unscrew screws - 2 - and remove clamping washers - 3 -.

- Remove the impact bar - 1 -.

Installation

Install in reverse order of removal. Note the following:

• For the correct tightening specifications, refer to => [ Impact Member and Impact Absorber Assembly Overview ] Impact Member and Impact Absorber Assembly Overview.

- Install the impact absorber. Refer to => [ Impact Absorber ] Impact Absorber.