Antitheft Motion Sensor: Service and Repair

Anti-Theft Alarm System Sensor (G578)

Removing






- If the control module is replaced, select "Replace" function for the respective control module in "Guided Functions" in the Vehicle diagnostic tester.

- Remove front interior/reading lamp. Refer to => [ Front Interior Lamp/Reading Lamp ] Front Interior Lamp/Reading Lamp.

- Release retaining clips - arrow A - and tip Anti-Theft Alarm System Sensor - item 3 - out of interior light/reading lamp - arrow B -.

- Using a small screwdriver - 1 -, carefully unclip individual interior monitoring sensors - 2 - from interior light/reading lamp.

Installing

Install in reverse order of removal. Note the following:

- Connect electrical connector.

- Install front interior/reading lamp. Refer to => [ Front Interior Lamp/Reading Lamp ] Front Interior Lamp/Reading Lamp.