Crankshaft Main Bearing

Replace Bolts
Crankshaft, Tightening Sequence





Tighten the crankshaft bolts in sequence - 1 to 5 -
Tighten the bolts - 1 through 10 - and - arrows - hand-tight
Tighten the bolts - 1 through 10 - 65 Nm
Tighten the bolts - 1 through 10 - 90° further
Tighten the bolts - arrows - 20 Nm
Tighten the bolts - arrows - 90° further

Identification





Radial clearance:
New 0.017 to 0.037 mm
Wear limit 0.15 mm

Axial clearance:
New 0.07 to 0.23 mm
Wear limit 0.30 mm