Variable Valve Timing Actuator: Service and Repair

Camshaft Adjustment Valve 1 (N205)

Removing






- Disconnect the connector from the camshaft adjustment valve 1 - 1 -.

- Remove the bolts - arrows - and then the camshaft adjustment valve 1.

Installing

• For the correct tightening specifications, refer to => [ Timing Chain Guard and Camshaft Adjustment Valve 1 (N205) Overview ] Timing Chain Guard and Camshaft Adjustment Valve 1 (N205) Overview

Installation is carried out in the reverse order while noting the following:

• Replace the O-ring.

- Coat the seal and the O-ring with engine oil.