Front Subframe Mount: Testing and Inspection

Subframe Mount, Checking Adjustment

Procedure






- Release the EVAP canister - B arrow -, remove it upward - A arrow - and lay it aside.

• Ignore items - 1 and 2 -.

- Check dimensions on the right mount for engine and transmission:

• Both bolt heads - 2 - must be parallel to the edge of the engine mount support arm - 3 -.






• A distance of - x - = 16 mm must be present between engine mount - 1 - and engine support - 4 -.

• Distance - x - = 16 mm, can also be checked with corresponding round stock.

- Adjust the subframe if the distance measured is too small or too large. Refer to => [ Subframe Mount, Adjusting ] Adjustments.