Center Differential Housing With Bolted Driveshaft Overview

Center Differential Housing with Bolted Driveshaft Overview

• => [ Repair Information ] Repair Information.

• => [ Clean Working Conditions ] Clean Working Conditions.

The center differential housing can also be removed and installed with the transmission installed. Refer to => [ Center Differential Housing, Installed Transmission and Bolted Driveshaft ] Center Differential Housing, Installed Transmission and Bolted Driveshaft.






1 Bolt

• Aluminum bolts

• Quantity: 11

2 Housing

• For the center differential

3 Ball Bearing

• For the rear flange shaft

4 Spacer Sleeve

5 Gear Carrier

• Installed position: The tab must fit into the cut-out in the transmission housing.

6 Spacer Sleeve

7 Adjusting Ring

8 Ball Bearing

• For the center differential

9 Center Differential

10 Ball Bearing

• For the center differential

11 Pressure Spring

12 Adjusting Ring

13 Plate Spring

• Installed position: The side curved outward faces the shaft seal - 17 -

14 Locking Ring

• For the rear flange shaft

15 Bolt

• Steel bolts

• Quantity: 2

16 Balance Weight

• Installed depending on the version

17 Shaft Seal

18 Rear Flange Shaft

• Without vibration damper

• For the correct allocation, refer to the Parts Catalog

19 Rear Flange Shaft

• With vibration damper

• For the correct allocation, refer to the Parts Catalog

20 Bolt