Flange/Driveshaft Seal

Flange/Driveshaft Seal

Special tools, testers and auxiliary items required

• Needle Bearing Drift (VW 295 A)

• Thrust Plate (VW 402)

• Needle Bearing Drift (VW 408 A)

• Support Channels (VW 457)

• Separating Tool 22 to 75 mm , for example, Kukko Separating Tool 12-75 mm (Kukko 17/1)

Remove Ring - A - from Flange/Driveshaft





B Separating tool 12 to 75 mm , for example, (Kukko 17/1)

Installation Location of the Ring - A - on the Flange/Driveshaft





• The ridge - arrow 1 - on the ring - A - must fit into the groove - arrow 2 - on the flange - B -. The smaller outer circumference - arrow 3 - faces the flange.

Installing the Ring - A - onto the Flange/Driveshaft





• The ring - A - must fit into the groove all around the flange.