Terminal 30 Wire Junction 2

Terminal 30 Wire Junction 2

Removing






- Remove the bolts - 3 -.

- Remove the clips - 2 - from the mounts and remove the plenum chamber cover - 1 -.

- Release the retainer - arrow A - and open the cover - arrow B -.






- Disconnect the wires - 1, 2, 3, 5, 6 and 9 -.






- Remove the bolt - 8 - and remove the terminal 2 wire junction 30 (TV22) from the strut tower.

• Ignore - 4, 7 and 10 -.

Installing

• Tightening specifications, refer to => [ Terminal 30 Wire Junction 2, Tightening Specifications ] E-Box, Wire Junction, Fuse Holder and Battery Overview.

Install in reverse order.