Right Instrument Panel Fuse Panel

Right Instrument Panel Fuse Panel

Removing






- With the ignition switched off, disconnect the negative battery cable. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the glove compartment.

- Release the retaining clips - 1 - in the - direction of the arrow - and press the fuse panels - 2 - and - 3 - back and out of the fuse panel D.

• Disregard item - 4 -.

- Remove the fuses from the fuse panel.






- Release the retaining clips - arrows - and remove the cover from the fuse panel.

- Remove the connector retaining strip - 1 - - arrow - and remove the connectors from the plug-in socket.






• For the exact assignment of right instrument panel fuse panel refer to the current wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install the glove compartment.

- Connect the battery. Refer to => [ Connecting ] Battery, Disconnecting and Connecting.