Left Instrument Panel Fuse Panel

Left Instrument Panel Fuse Panel

Removing

- With the ignition switched off, disconnect the negative battery cable. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the fuse panel C. Refer to => [ Fuse Panel C with Left Instrument Panel Fuse Panel ] Fuse Panel C With Left Instrument Panel Fuse Panel.

• Remove the driver side top instrument panel cover if necessary.

- Remove the fuses from the fuse panel.






- Release the retaining clips - arrows - and remove the cover from the fuse panel.

- Remove the connector retaining strip - 1 - - arrow - and remove the connectors from the plug-in socket.






• Check the exact assignment for left instrument panel fuse panel in the applicable wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install the fuse panel C. Refer to => [ Fuse Panel C with Left Instrument Panel Fuse Panel ] Fuse Panel C With Left Instrument Panel Fuse Panel.

- Connect the battery. Refer to => [ Connecting ] Battery, Disconnecting and Connecting.