Tiptronic Switch Through MY 2011

Tiptronic Switch through MY 2011

- Turn off all electrical consumers.

- Remove the key.

Removing

- Remove driver's airbag.

- Disconnect trim ring from steering wheel.

- Slide multi-function button - 2 - out of steering wheel in direction of arrow.






- Turn the button around.

- Disconnect and remove the connector - 2 - from the multifunction button - 1 -.






- Remove the screw - arrow - and remove the Tiptronic switch to the rear.






Installing

- Install in reverse order of removal.

Removal and installation of the left switch is identical.

Tightening specifications, refer to => [ Multifunction Steering Wheel Overview (through MY 2011) ] Multifunction Steering Wheel Overview (Through MY 2011).