Shift Indicator - A/T: Service and Repair

Selector Lever Transmission Range Position Display (Y26) with Illumination (L101)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Shift the selector lever into the "S" position.

- Switch the ignition off.

- Carefully pry the selector lever boot out at the side using the (3409) or a small screwdriver - arrows -.

- Fold the selector lever boot upward.

- Release the retaining spring - 2 - and remove transmission range display - item 1 - - arrow -.






- Disconnect the electrical connector.

Installing

Install in reverse order.