V6 3.0L TFSI, V8 4.2L FSI

Brake System Vacuum Pump (V192) Overview

The construction of the brake system vacuum pump depends on the engine.

The electrical brake system vacuum pump is switched on by the engine control module depending on the intake line pressure.






1 - Vacuum Line

2 - Electrical Connector

3 - Brake System Vacuum Pump (V192)

• Removing and Installing, refer to => [ Brake System Vacuum Pump (V192) ] Brake System Vacuum Pump (V192).

• Checking, refer to => [ Brake System Vacuum Pump (V192), Checking ] Brake System Vacuum Pump (V192), Checking.

4 - Check Valve

• Removing and Installing

• Checking, refer to => [ Check Valve, Checking ] Check Valve, Checking.

5 - Brake System Vacuum Pump Bracket

• Removing and Installing, refer to => [ Brake System Vacuum Pump (V192) Bracket ] Brake System Vacuum Pump (V192) Bracket.

6 - Bracket Nut

• 20 Nm