Glove Compartment Cover Brake Component

Glove Compartment Cover Brake Component

Removing






- Switch the ignition off and remove the ignition key.

- Remove the side cover on the passenger side instrument panel. Refer to => [ Instrument Panel Side Cover ] Instrument Panel Side Cover.

- Detach the fuse panel on the right fuse panel and push it to the side.

- Disconnect electrical harness connector - 3 -.

- Remove hinge pins - 1 -.

- Release the lid dampening mechanism - 2 - by turning counterclockwise - arrow - and remove it.

Installing

To install, perform the steps used in removal in reverse order.