Alarm Horn: Service and Repair

Alarm Horn (H12)

Removing






- Remove the bolts - 3 -.

- Remove the clips - 2 - from the mounts and remove the plenum chamber cover- 1 -.

- Remove the nut - 3 -.






- Disconnect the electrical connector - 1 -.

- Remove the alarm horn - item 2 - upward.

Installing

• Tightening specifications, refer to => [ Ultrasonic Interior Monitoring Overview ] Ultrasonic Interior Monitoring Overview.

Install in reverse order of removal, observing the following:

- Engage retaining tab in opening on bracket.