Turbocharger Coolant Pump: Service and Repair

Charge Air Cooling Pump (V188)

Special tools, testers and auxiliary items required

• Hose Clamps Up to 25 mm Dia. (3094)

• Hose Clip Pliers (VAS 6362)

Removing






- Remove the front noise insulation - 1 -..

- Disconnect the connector - 1 -.






- Free up the coolant hose - arrow -.

- Remove the bolt - 4 - and remove the bracket.

- Loosen the clamps - 2 and 3 - and remove the coolant hoses from the charge air cooling pump with the (3094).

Installing

Install in reverse order, paying attention to the following:

• Tightening specification, refer to => [ , Tightening Specifications ] Coolant Pipes Overview.

• Secure all hose connections with hose clamps of the same type as those equipped by the factory. Refer to the Parts Catalog.

- Check the coolant level. Refer to => [ Check the coolant level. ] Service and Repair.

- Install the noise insulation..