Multibox

Multibox

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)






Removing






- Move the center armrest - 6 - all the way up and then open it up - 6 -.

- Unclip box - 5 - at rear with trim removal wedge (3409).

- Tip box - 5 - upward.

- Unclip front cover - 4 - with Trim Removal Wedge (3409) and remove it.

- Remove screws - 3 - (quantity: 4).

- Remove Multibox - 2 - from front bracket - 1 - and rear bracket - 7 -.

Installation

Install in reverse order of removal.

For the correct tightening specifications, refer to => [ Multibox Assembly Overview ] Multibox Assembly Overview