Underbody Panel, Offroad Style Package Overview

Underbody Panel, Offroad Style Package Overview






1 Bolt

• 20 Nm

2 Mount

3 Bolt

• 2 Nm

4 Underbody Trim Panel

• The sill panel molding is removed. Refer to => [ Sill Panel Molding Overview ] Sill Panel Molding Overview.

• It is necessary to use a body saw to make the openings for new trim.

5 Underbody

6 Bolt

• 2 Nm

Openings For The Underbody Panel

• Before installing new trim, the illustrated openings must be made at the same location where they were removed.

• Make the openings according to the template supplied.






1 Underbody Trim Panel

• Cut out the openings - A -, - B - and - C - with a body saw according to the template.