Washer Fluid Level Switch: Service and Repair

Windshield Washer Fluid Level Sensor (G33)

Special tools, testers and auxiliary items required

• Drip Tray

Removing






- Switch off ignition and remove ignition key.

- Remove right front wheel.

- Remove front right wheel housing liner..

- Disconnect the electrical connector - 1 -.

- Place a drip tray under the windshield washer fluid reservoir.

- Remove the windshield washer fluid level sensor - item 2 - from the washer fluid reservoir.

Installing

Install in reverse order of removal, observing the following:

- Check the sealing grommet - 3 - for damage.

- Install the right front wheel housing liner..