ATF Level Inside Transmission

ATF Level Inside Transmission

Special tools, testers and auxiliary items required

• Pipe Cutter (6056/2)

• Adapter for Oil Filling (VAS 6262 A)

Measure the length of the bleed pipe on the (VAS 6262 A). Shorten it if necessary.






It is necessary to shorten the bleed pipe on the adapter for the (VAS 6262 A) to dimension - a - so that it cannot touch the bottom of the oil container.

• - a - = 210 mm

• Dimension - a - is measured starting from the shaft (the green surface) on the adapter for (VAS 6262 A).

- Mark the dimension on the bleed pipe and then shorten it using (6056/2).






- Clean the (VAS 6262 A).