Windshield Wiper/Washer Switch (E22)

Windshield Wiper/Washer Switch (E22)

Removing






- Remove the steering column switch module. Refer to => [ Steering Column Switch Module ] Steering Column Switch Module.

• Steering must be in center position (wheels in straight ahead position) when removing and installing coil connector with slip ring.

- Carefully release catches - arrows -.

- Remove airbag spring/spiral spring with slip ring - 2 - with Steering Angle Sensor (G85) - item 1 - from steering column switch module.

- Remove screws - 1 - and - 2 - and remove Windshield Wiper/Washer Switch - item 3 - from steering column switch module - arrow -.






Installing

Install in reverse order of removal, observing the following:

- Make sure all fasteners and electrical connectors are properly engaged.

- Install the steering column switch module. Refer to => Steering Column Switch Module.

Tightening Specifications