Suspension Control Module: Service and Repair

Level Control System Control Module (J197)

Special tools, testers and auxiliary items required

• Vehicle Diagnosis, Testing and Information System (VAS 5051 B)

Removing

- If the control module is replaced, select "Replace" function for respective control module in "Guided Fault Finding".

Use vehicle diagnosis, testing and information system (VAS 5051 B) for this.

- Remove the luggage compartment floor covering and vehicle tool kit on right side.

- Release and remove the connectors - arrows - from the control module.






- Remove control module - 1 -.

Installing

Install in reverse order of removal. Note the following:

- Level control system control module , adapting. Refer to => [ Level Control System Control Module, Programming ] Testing and Inspection.