Right Instrument Panel Fuse Panel

Right Instrument Panel Fuse Panel

Removing






- With ignition switched off, disconnect battery Ground (ND) wire. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the glove compartment.

- Pry off right cover from instrument panel using a screwdriver - arrow -.

- Release retaining clips - arrows - and press fuse panels - 2, 3, 4 - back and out of base mount.






• Ignore - item s 1, 5, 6, 7 -.

- Unlock the release and remove from the fuse carrier, if equipped.






- Remove the fuses from the fuse panel.

- Release retaining clips - arrows - and remove the cover from the fuse panel.

- Remove connector retaining strip - 1 - - arrow - and remove connectors from plug-in socket.






• For the exact assignment of right instrument panel fuse panel refer to the current wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install the glove compartment.

- Connect battery. Refer to => [ Connecting ] Battery, Disconnecting and Connecting.