12 V Socket 5

12 V Socket 5

Special tools, testers and auxiliary items required

• Release Tool (T40148)

Removing






- Open the cover for the right luggage compartment side trim.

- Disconnect the electrical connector.

- The release tabs - 2 - on the (T40148) must engage in the openings in the 12 V socket 5 (U26) - item 3 - - arrow - and the threaded pin - 1 - must slide down as far as the stop.

- Open the mount cover - 2 - and hold it in that position.






- Slide the (T40148) as far as the stop into the 12V socket - 3 -.

- Rotate the thumbwheel - 1 - on the (T40148) clockwise as far as the stop.

• The piston - 2 - is pulled upward and the release tabs - 1 - on the (T40148) spread - arrows -.






- Remove the 12 V socket from the mount.

Installing






Install in reverse order of removal, observing the following:

- Remove the support - 1 - on the (T40148).

- Slide the piston down and hold it in place.

- Rotate the thumbwheel - 4 - on the (T40148) counterclockwise - arrow -. This loosens the release tabs - 2 - on the 12V socket- 3 - so the (T40148) can be removed.