Collision Avoidance - False Warning By Audi Side Assist
96 False warning by Audi Side Assist96 13 55
2028809/6
April 15, 2013
Supersedes Technical Service Bulletin Group 96 number 13-52 dated February 25, 2013 for reasons listed below.
Vehicle Information
Condition
Customer complains that Audi Side Assist is providing false warnings (no vehicle is present). Concern may or may not be duplicated.
No DTCs are present in the Audi Side Assist system.
Technical Background
Software fault.
Production Solution
Revised software.
Service
SVM Update Instructions
1. Follow all instructions in the attached TSB 2011732, 00 Software Version Management (SVM), operating instructions.
2. Update the lane change assist control module, J769 (3C), using the SVM action code as listed in the table if necessary.
Warranty
Additional Information
The following Technical Service Bulletin will be necessary to complete this procedure:
^ TSB 2011732, 00 Software Version Management (SVM), operating instructions.
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.