Control Module Upper Frame

Control Module Upper Frame

Removal






- Remove the luggage compartment right side trim panel cover.

- Disconnect the connectors from the control modules - 1 through 5 -.

- Remove the nuts - arrows - and the frame - 6 - with the control modules.

Installation






• Tightening specification, refer to => [ Luggage Compartment Relay and Fuse Carrier and Control Modules Overview ] Luggage Compartment Relay and Fuse Carrier and Control Modules Overview.

Install in reverse order of removal. Note the following:

- The guide - 1 - for the frame - 3 - must fit into the body - 2 -.

- Install the cover for the right luggage compartment side trim panel.