Air Guide to Left Instrument Panel Vent - Driver Side

Air Guide to Left Instrument Panel Vent - Driver Side

Removal






- Remove the central tube.

- Unscrew the screw - 3 - from the expanding clip.

- Thread the air guide of the instrument panel vent - 1 - out of the central tube - 2 - - arrow -.

Installation

Installation is done in reverse order, observe the following:

- Ensure that the air guide is installed evenly on the mount on the air distributor housing when installing the central tube.

• If the air guide is not installed properly in the mount, noises can result from escaping air, or the escaping warm/cold air can affect the regulation of the A/C system.

- Install the central tube.