Diagram 3/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Brake lamp switch, Engine control module, Fuel tank leak detection control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Locations

G400 - Fuel tank pressure sensor Locations

J623 - Engine control module Locations

J909 - Fuel tank leak detection control module Locations

SF2 - Fuse 2 (on fuse panel F) Overview Of Fuses

SB3 - Fuse 3 (on fuse panel B) Overview Of Fuses

ST3 - Fuse panel 3

T3s - 3-pin connector

T4ak - 4-pin connector

T17a - 17-pin connector, Left plenum chamber E-box connector station Locations

T17b - 17-pin connector, Left plenum chamber E-box connector station Locations

T17i - 17-pin connector, in the left A-pillar connector station Locations

T17o - 17-pin connector, in the connector station, right A-pillar Locations

T94 - 94-pin connector Locations

(45) - Ground connection behind instrument panel, center [1][2]Ground Locations

(199) - Ground connection 3 (in instrument panel wiring harness)

(B335) - Connection 1 (54) (in main wiring harness)

(B635) - Positive connection 3 (87) (in main wiring harness)

* - Only for vehicles with a fuel system diagnostic pump

*2 - Refer to applicable wiring diagram for fuse positions

Previous Diagram 3/20 (Tracks 253-266)

Next Diagram 3/22 (Tracks 281-294)