Diagram 46/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Image processing control module, Camera control module, Extended CAN bus high wire junction





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J851 - Image processing control module Locations Locations

J852 - Camera control module Component Locations

T5c - 5-pin connector Component Locations

T5i - 5-pin connector Image Processing Control Module -J851-

T12a - 12-pin connector Component Locations

T12i - 12-pin connector Image Processing Control Module -J851-

T46a - 46-pin connector Locations

TV41 - Extended CAN bus high wire junction

TV42 - Extended CAN bus low wire junction

(43) - Ground connection on A-pillar, lower right [1][2]Ground Locations

(380) - Ground connection 15 (in main wiring harness)

(B108) - CAN bus extended high connection 1 (in main wiring harness)

(B109) - CAN bus extended low connection 1 (in main wiring harness)

* - Shielding on connector housing

*2 - Data bus wire (CAN bus)

Previous Diagram 46/3 (Tracks 15-28)