Memory Seat/Steering Column Adjustment Control Module Bracket J136/J521

Memory Seat/Steering Column Adjustment Control Module Bracket J136/J521

Memory seat/steering column adjustment control module (J136) / passenger memory seat control module (J521)

Removing






- Remove the front seat control module:

• Memory seat/steering column adjustment control module, refer to => [ Memory Seat/Steering Column Adjustment Control Module J136/J521 ] Memory Seat/Steering Column Adjustment Control Module J136/J521.

• Seat ventilation control module (integrated in the seat heating) refer to => [ Right and Left Front Seat Ventilation Control Modules J799/J800 ] Right and Left Front Seat Ventilation Control Modules J799/J800.

• Passenger occupant detection system control module (J706) - country-specific, refer to => [ Service Kit with Front Passenger Seat Occupant Sensor G128 and Passenger Occupant Detection System Control Module J706 ] Service Kit With Front Passenger Seat Occupant Sensor G128 and Passenger Occupant Detection System Control Module J706.

- Press pin - 2 - out of the clip - arrow A - of the bracket - 1 - in the direction of the seat cushion using, for example, an upholstery needle.

- Remove the pin that was pressed out from the seat pan.

- Remove the support foot - 2 - from the upper frame of seat pan - 1 -, unclipping clip - arrow A - at the upper seat frame.






- Detach retaining tabs - arrow B - on both sides.

- Carefully remove bracket from the seat pan - arrow -.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Memory Seat/Steering Column Adjustment Control Module, Assembly Overview ] Memory Seat/Steering Column Adjustment Control Module, Assembly Overview.