Pneumatic Line Repair

Pneumatic Line Repair

• A repair kit with pneumatic lines and line connectors is available for the repair of pneumatic lines. Refer to Parts Catalog.

• Pneumatic lines must not be disconnected directly at the components, only disconnection and connection according to the methods described below is permissible.

• Original replacement parts are delivered with short sections of line to which pneumatic lines with line connectors are connected.

• Protect pneumatic lines and line connectors from soiling.

• Heating the pneumatic lines to connect them to the line connectors is NOT permissible.

• The use of lubricant to connect the pneumatic lines to the line connectors is NOT permissible.

• The repaired pneumatic line is to be exactly as long as the previous line - tolerance +/- 10 mm.

• Contaminants at connecting points can cause leaks. Make sure to check that these connections are clean when checking the pneumatics and measuring equipment.