Floor Panel For Rear Bench Seat Mounting Grommets and Wire Frame, Checking and Aligning

Floor Panel for Rear Bench Seat Mounting Grommets and Wire Frame, Checking and Aligning

Check and adjust the floor panel






- Check body openings - 1 - for deformations.

- In the case of deformation, readjust the panel with a plastic hammer.

• Remaining minor deformation is permissible.

Check and adjust the rear bench seat wire frame.






- Check if the wire frame is aligned in the marked area - arrow - before installing the rear seat bench.

- If the wire frame is bent, bend it back far enough until it is realigned - arrow -.