Right and Left Front Seat Ventilation Control Modules J799/J800

Right and Left Front Seat Ventilation Control Modules J799/J800

Left front seat ventilation control module (J800) / right front seat ventilation control module (J799)

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Move the front seat all the way to the rear and then into its highest position.

- Press the releases - arrow - disconnect the connector - 2 - from the seat ventilation control module - 1 -.

- Release the tab - arrow 1 - with a trim removal wedge (3409).






- Swivel the seat ventilation control module downward - arrow 2 -.

- Disengage and the hook - arrow 3 - on the seat ventilation control module from the bracket and remove the module.

• Detach the front seat and tilt it to back if the seat ventilation control module is not accessible. Refer to => [ Power Standard Seat/Sport Seat/Super Sport Seat ] Power Standard Seat/Sport Seat/Super Sport Seat.

Installation

Install in reverse order of removal. Note the following:

• The seat ventilation control module must click into the bracket.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Seat Ventilation Control Module Assembly Overview, Integrated in Seat Heating ] Seat Ventilation Control Module Assembly Overview, Integrated In Seat Heating.