Mirror Adjusting Unit

Mirror Adjusting Unit

Removing






- Remove the mirror glass. Refer to => [ Mirror Glass ] Mirror Glass.

- Remove the bolt - 1 -.

- Disengage the mirror adjuster - 2 - from the mount - arrow -.

- Disconnect the connector - 3 - from the mirror adjuster.

- Remove the mirror adjuster.

Installing

• For the correct tightening specifications refer to => [ Exterior Mirror Assembly Overview ] Exterior Rearview Mirror Overview.

Installation is reverse of removal, but note the following:

- Press the mirror adjusting unit onto the mirror mount until it engages audibly.

- Install the mirror glass. Refer to => [ Mirror Glass ] Mirror Glass.