Front Outside Door Handle Touch Sensors

Front Outside Door Handle Touch Sensors

Special tools, testers and auxiliary items required

• Hook (3438)

Removing






- Remove the outside door handle.

- Release the retaining tabs - A arrows - and remove the electrical connector - 3 -.

- Carefully release the retaining hooks - B arrows - using a small screwdriver and remove the wiring guide.

• Ignore items - 1 , 2 -.

- Remove the front exterior door handle illumination bulb, if equipped. Refer to => [ Front Exterior Door Handle Illumination Bulb ] Front Exterior Door Handle Illumination Bulb.

- Remove the cover - 1 - from the exterior door handle - 2 - using the (3438).






- Remove the cover from the exterior door handle - arrow -.

- Position a large stabile screwdriver on the outside door handle as illustrated.






- Remove the exterior door handle touch sensor forward bout the exterior door handle using force.

- Remove the outside door handle touch sensor from the handle.

Installing

Install in reverse order of removal. Note the following:

- Slide the outside door handle touch sensor in until it engages audibly.

- Install the outside door handle.