Rear Door Lamps and Switches

Window Regulator Switches

Removing






- Turn off the ignition and remove the ignition key.

- Insert a screwdriver in the hole at the bottom of the trim - 1 -.

- Beginning at the rear, carefully pry the trim out of the door trim - arrow -.

- Carefully release the retaining hooks - arrows - using a small screwdriver.






- Remove the window regulator switch - 2 - from the mount - 1 -.

- Disconnect the electrical connector - 3 -.

Installing

Install in reverse order of removal, observing the following:

- Press the window regulator switch into the switch mount until the fasteners engage.

- Install the armrest trim.