Passenger Seat Occupant Recognition Overview

Passenger Seat Occupant Recognition Overview

The passenger occupant detection system service kit is precalibrated and must not be disconnected. The service kit consists of:

• Passenger Occupant Detection System Control Module -J706

• Passenger Occupant Detection System Pressure Sensor -G452

• Passive Occupant Detection System Mat

• Seat Cushion

• Wiring Harness: between the passenger occupant detection system control module -J706 and passenger occupant detection system pressure sensor -G452.

Follow all safety precautions when working on the passenger occupant detection system. Refer to => [ Passenger Occupant Detection System Deactivation Additional Safety Precautions ] Passenger Occupant Detection System Deactivation Additional Safety Precautions.

• The passenger occupant detection system is only installed in the front passenger seat.






1 Passenger Occupant Detection System Pressure Sensor (G452)

• Is a component with the seat occupied recognition mat


• Do not disconnect the electrical connector

2 Seat Pan

3 Retaining Clip

4 Cushion

• For seat pan

• Do not separate from the seat occupied recognition mat - 6 -

5 Retaining Clip

• Do not release

6 Mat

• For seat occupied recognition

• Is a component with the passenger occupant detection system pressure sensor (G452)

• Do not separate from the seat pan upholstery - 4 -

7 Mount

• For passenger occupant detection system control module (J706)

8 Spreader Pin

• For securing the mount to the seat pan

9 Electrical Wiring Harness

• Do not separate from the passenger occupant detection system pressure sensor (G452) and passenger occupant detection system control module (J706)

10 Front Passenger Seat Position Sensor (G554)

• Is a component of the electrical wiring harness - 9 -

• Removing and installing, refer to => [ Seat Position Sensor, with Seat Occupied Sensor for Passenger Airbag Deactivation ] Seat Position Sensor, With Seat Occupied Sensor For Passenger Airbag Deactivation

11 Passenger Occupant Detection System Control Module (J706)

• Removing and installing, refer to => [ Passenger Occupant Detection System ] Passenger Occupant Detection System Sensor

• Do not disconnect the electrical connector