Selector Lever Transmission Range Position Display Unit With Selector Lever Scale Illumination Bulb

Selector Lever Transmission Range Position Display Unit with Selector Lever Scale Illumination Bulb

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Shift the selector lever into the "S" position.

- Turn the ignition off.

- Carefully pry the selector lever boot out at the side using the (3409) or a small screwdriver - arrows -.

- Fold the selector lever boot upward.

- Release the retaining spring - 2 - and remove the selector lever transmission range position display unit (Y26) - item 1 - - arrow -.






- Disconnect the electrical connector.

Installing

Install in reverse order.