Rear Noise Insulation Assembly Overview

Rear Noise Insulation Assembly Overview






1 Rear noise insulation

• Loosen the 3 rear quick-release fasteners on the noise insulation.

• Loosen the quick-release fasteners - 6 - and remove the noise insulation toward the rear.

2 Crossbrace

3 Transmission crossmember

4 Threaded clip

• Slide into the transmission crossmember as shown

5 Washer

6 Quick-release fastener

• Rotate 180° to the left to remove.

• When installing, the connection must engage when rotating.

7 Threaded clip

• Slide sideways into the crossbrace.