Power Mirror Switch: Service and Repair

Mirror Adjusting Switch

Removing






- Turn off the ignition and remove the ignition key.

- Insert a screwdriver in the hole at the bottom of the trim - 1 -.

- Beginning at the rear, carefully pry the trim out of the door trim - arrow -.

- Disconnect the electrical connector - 3 -.






- Carefully release the retaining hooks - arrows - using a small screwdriver.

- Press the mirror adjusting switch - 2 - out of the switch mount - 1 -.

Installing

Install in reverse order of removal, observing the following:

• When installing, ensure the symbol panel is inserted in front of the mirror adjustment switch.

- Press the mirror adjustment switch into the switch mount until the catches engage.

- Install the armrest trim.